What is a Vehicle Wrap?
A Wrap is a vinyl decal that is applied directly over the original paint of the vehicle. This advertising/marketing solution is completely reversible, as the wrap can be easily removed by our experts to make room for another wrap or to restore the original appearance of the vehicle.
What’s involved in a Vehicle Wrap?
All Vehicle wraps come to life at the end of a three phase process. The first is the design phase which includes obtaining accurate measurements for the vehicle and creating the design of the graphics to be applied. Next is the production phase where the graphic is printed and then laminated to protect the vinyl from abrasions and UV rays that can cause graphics to fade over time. The third phase is installation, when the vinyl is actually applied to your vehicle.
What’s the difference between a partial wrap and a full wrap?
A partial wrap only takes up a portion of the vehicle's surface, as opposed to a full wrap, which takes up the entire surface. ½ partial wrap normally includes the entire rear of the vehicle and ½ way up the vehicle, and includes a hood logo. ¾ partial wrap normally includes the entire rear of the vehicle and ¾ way up the vehicle, and includes a hood logo.
How long will the wrap stay on my vehicle?
The life of your wrap depends on many factors but the sun exposure plays a big part in wrap longevity. In general, a high performance cast vinyl wrap using solvent long life inks and a UV protective overlaminate can last 3 to 6 years.
Will a Vehicle Wrap damage my paint?
In most cases vehicle wraps will not damage factory paint jobs. Paint in poor condition may peel when vinyl is removed.
Do I have to wash my vehicle before installation?
Yes. All vehicles must be free of dust, mud, wax, oil, armor-all type products, and other agents that may prevent the vinyl from adhering to the vehicle surface during the installation process. Inked Media will ensure that your vehicle is free of all these agents prior to wrap installation.
Do I need to bring my vehicle in for measurements?
Yes. Inked Media utilizes a software program that has accurate dimension of most standard production run cars, trucks, vans, and trailers and more. This program will be used to design the wrap but accurate measurements will need to be taken prior to production of the wrap.
How long will it take to wrap my vehicle?
Wrap turnaround time varies from project to project, but the average time is about 2 days.
If my vinyl vehicle wrap graphics are damaged, can they be fixed?
Yes. Normally, any damaged portion of the wrap can be replaced without having to reproduce and reinstall the entire wrap.
Can you wrap a leased vehicle?
You must always obtain permission to wrap a leased or rented vehicle. Leased/rented vehicles have an excellent surface to wrap because the factory paint is fresh and prime for the vinyl adhesion.
How do I care for my Wrap?
Hand washing is best. Try to avoid high pressure washes and be careful never to use an ice-scraper on window graphics.
What is considered when calculating the cost of a Vehicle Wrap?
The design process, materials (including vinyl and lamination), print, and installation all play a part in the total cost of the vehicle wrap. The size and shape of your vehicle also factor into the cost. In general, vehicles with compound-curves, or indentions, like a VW Bug or PT Cruiser are more difficult and more expensive to wrap than a box van with flat surfaces. Partial wraps are a great way to minimize cost as opposed to a full wrap. |
